So those of you who read my VMworld 2013 US round up will already have read about all the juicy bits that was announced in San Fran….. basically vSphere/vCloud 5.5…..
The keynote session by Pat Gelsinger pretty much repeated a lot of what was announced in the US, with a little bit of juicy extras (see below)…… Pat did a good job engaging the audience, the dialogue flowed and it certainly kept my attention on what was being announced!
I don’t know why, but I tend to find some of the speakers from the US more interesting than those from the UK….. Not sure if it’s the accent or the way they’re more animated, or maybe it’s the way they deliver their presentations…..? Anyways, if you’re a speaker and you find me falling asleep – it’s because you’re not interesting….. ;oP
First up was the announcement of VMware’s acquisition of Desktone!
I first read about Desktone after VMworld US as there were a lot of discussions regarding vCHS and possible Desktop-as-a-Service (DaaS) offerings… rumours were awash about Desktone being a ‘good fit’ for VMware…… guess those rumours turned out to be true!
One of the key points about the Desktone acquisition is that it brings the added advantage for on-premise VDI customers to burst out into the cloud (like a vCHS provider) if they suddenly require the need to spin up more desktops then they have resources for. From what I could gather speaking to the people at the Desktone booth, they have a piece of software, very similar to vCloud connector, that manages the connection of on-premise and off-premise VDIs, including the ability to transfer between the two….. interesting!
And obviously to bean-counters, the idea of DaaS gives them the opportunity to move all the outlay from CAPEX into a more “easy-to-budget” OPEX…. afterall, you’ll know how much it would cost to spin up and consume a desktop in the cloud. It would also save time and money because it allows remote users to spin up desktops on any device (tablet, laptop, smartphone, thin clients, etc).
The next main announcement was that vCloud Hybrid Service was coming to Europe, with Sungard being the first vCHS provider. (No photo here because some bozo in front of me decided to stand up and block my shot).
Whilst we’re talking about Cloud, updates to some products were also announced to enhance Cloud Management: vCAC 6.0, vCOPs 5.8, vCenter Log Insight 1.5 and vITBM.
Next up was the announcement of the General Availability of VMware NSX!
Network has always been an issue with virtualisation, you spin up a VM in minutes yet always have to rely on some sort of configuration to be carried out on your physical network device….. NSX was launched to bring the Network layer into the virtualisation stack as a ‘Software Defined’ device.
Think of it as a Network Hypervisor….. what ESX did for Compute, NSX will do for Networks! NSX abstracts network operations and configurations from they underlying hardware into a distributed virtualisation layer. It will allow you to define switches, firewalls, loadbalancers, routers, plus other networking elements.
It’s vendor-agnostic…. supporting most hypervisors and physical network devices.
An interesting slide (and one I didn’t get a photo of) was the ability to define network policies that had the switch configuration, the firewall configuration and other network elements and then just simply ‘assign’ it to a VM…. bobs your uncle, your VM is now fully configured!
The slides below were from a technical breakout session that introduced NSX and delved into it a bit more then what was presented at the keynote session…. This slide shows the various components of NSX:
What’s very interesting from the partner slides we saw was that Cisco was missing as a partner!! It’s quite obvious that the relationship between Cisco and VMware have gone off the boil again…… and I’ve heard a rumour that Cisco maybe announcing something big in the SDN arena sometime soon!
The last thing I’m going to talk about was the announcement of the GA of vDP 5.5 Advanced (vDP 5.5 std was announced at VMworld US).
The key items to note about this product is that it now integrates with both EMC Data Domain and EMC Avamar!
The integration with Data Domain allows you to use VDP as the front-end scheduler and back off to a Data Domain as the target. VDP will store all the Meta-data whilst DD stores all the backup data. This will be great as you’ll be backing off all your data onto a DD which means you will get global dedupe as your data is all in one location!
Finally the last take-away point from the vDP advanced announcement was the fact that it will allow you to consider Backup-as-a-Service by replicating your backup from the vDP appliance to a service provider who may be running something like Avamar!
So hopefully that has rounded up the key points that I got out of Day 1’s general session and announcements!
To be honest, there’s probably a lot more I could waffle on about, but given it’s now 2am and I’ve had a very long day followed by a stint at the EMC party… I’m quite mentally exhausted!
I doubt there’ll be much for me to blog about for the remaining 2 days as I’ve gone over the key announcements in this post… and if I’m honest, the technical sessions I’ve booked myself onto are more for me to enhance my knowledge of existing products and solutions.
Time for bed……!